How to Install a Ghost Immobiliser
A ghost immobiliser can be a powerful deterrent for car thieves. Combining this device with other security tools and remaining vigilant can help you build a strong defense against modern, tech adept thieves.
A ghost immobiliser will protect your vehicle from hotwiring, key cloning, and relay car theft by requiring a pin code to start the engine. It works by using buttons on your steering wheel or the centre console, which makes it unnoticeable to thieves.
Identifying the Wires
With increasing numbers of vehicles being stolen with no owner's key, it's important to protect your vehicle. Ghost immobilisers are an excellent way to add a layer of protection to your vehicle. It blocks all signals coming from your key fob so that it is impossible to start the vehicle without entering a PIN.
You can install the ghost immobiliser on yourself, but it is recommended to hire a professional to do the job. ghost immobiliser and tracker will know where to install the unit and how to connect it to your vehicle's wiring. The process of installation can be complicated and it is crucial that all connections are done correctly to avoid damage or malfunctions.
Wearing safety gear and working in a space which is well-lit will help you achieve the most effective results. Also, you should read the user manual and familiarise yourself with the wiring system. This will aid you in identifying the wires required for installation and make sure that you have the correct equipment and components to complete the job properly.
After the wiring is connected, you can reconnect the battery and test the system to determine whether it's functioning as intended. You should also make sure that the battery's connections are secure to prevent electrical problems. You should also label the CAN L and H wires with labels or tape to be in a position to track them during the installation process.
If you wish to permit someone else to drive your vehicle for a short period of time for a valet parking or when your vehicle is in for maintenance, the Ghost Immobiliser can be turned on in Transport Mode. You can enter the code by pressing a service button on the steering column, central console or door panels. Then, the Ghost Immobiliser will enter PIN mode that allows for changing of the code.
Some thieves attempt to bypass ghost immobilisers by using jamming or spoofing devices that block or send fake messages to the system. This can be avoided by investing in the latest anti-jamming technology and regularly monitoring your Ghost Immobiliser to detect signs of altering the system.
Disconnecting the Battery
The ghost immobiliser is a cutting-edge security tool created to stop theft of cars. It uses innovative technology to monitor and disable the engine when the correct PIN code is entered, thereby stopping the vehicle from being driven away by thieves. The system is extremely effective and stealthy. It does not have visible indicators that would deter criminals. You may need to remove your unit for maintenance, upgrades, or when selling your car.
This procedure requires special tools and knowledge, as you will be working with wires and removing certain factory components. Moreover, it is essential to follow the step-by-step directions provided by the manufacturer of the ghost immobiliser. You should also consult an expert auto electrician or mechanic, especially if you do not have any prior experience working with cars.
After identifying the wires and disconnecting them, it is important to verify the condition of your battery. Check that it's clean and free of corrosion and that the connections are secure. Consider replacing the battery if needed to ensure that it's strong enough for the electrical requirements of a security system aftermarket.
After you have disconnected the wiring from the battery, you are now able to begin to take out the ghost immobiliser. Utilize strippers or wire cutters to safely disconnect the wires, making sure not to harm the wires or their terminals. Make sure to label each wire to ensure that you are able to reconnect them correctly in the future. If the wires have been soldered, use a heat-resistant tool to break the connection. To prevent short-circuiting, it is essential to wrap the wires with insulation tape or heat shrink tubing.
Connect the wires back to the identified constant 12V power source. If necessary use a fuse tap to ensure that the connections are protected by fuse. Connect the grounding wire with an adequate grounding on the vehicle's chassis.
Once you have reconnected the wires, start your vehicle and enter the PIN. Then, restart the engine. If it does not start then the ghost immobiliser has been removed successfully.
Making Connections
A ghost immobiliser is an affordable method to increase the safety and security of your vehicle. It is connected to the CAN bus system in your car, intercepting signals and preventing the vehicle from starting until the right PIN code is entered. It is virtually impossible to break which makes it a perfect option for those who need extra security and peace of mind. In combination with a Thatcham Approved tracking system, it can also help to reduce your insurance costs.
Reviewing and obtaining the wiring diagram for your vehicle model will be essential to the installation process. The diagram can serve as a guide to locate the wires required for a precise connection. The connection will last and secure if you choose the proper wiring connectors or the correct soldering method.
The wires connecting the Ghost immobiliser with the CAN bus must be correctly identified and connected. It is a good idea to use small pieces of tape or labels to identify the CAN H and L wires, as this will prevent confusion during the installation process. The position of these wires will be different for every vehicle, which is why it is essential to refer to the wiring diagram for your vehicle as well as online resources when identifying them.
When the correct cables are connected after connecting the correct cables, power can be restored to the Ghost immobiliser. It is a good idea to test the immobiliser. Start the engine without entering the code. This will ensure that the immobiliser is installed correctly and working as intended. It is essential to test your immobiliser regularly. This will allow you to detect any issues or problems early.
Another benefit of the ghost immobiliser is that it can be put in place in a matter of minutes and doesn't require any cutting or modification to your vehicle's internal wiring. It's also a great choice for those who wish to increase the security of their vehicles as it can be utilized in conjunction with a Thatcham-approved alarm or tracker, which will send a notification to your tablet or phone whenever the vehicle is damaged.
Mounting the Unit
The Ghost immobiliser can be used as an effective deterrent for car thieves especially when paired with the use of a GPS tracking device. The device makes use of buttons on the center console, doors and the steering wheel to create a unique sequence that you are able to recognize. This prevents your vehicle from beginning. It is also tamperproof and weatherproof. It comes with a 3 year warranty and is endorsed by a number of insurance companies.
It is crucial to follow the directions when installing the device. While some people can handle the work themselves, it's best to consult a professional if you have any doubts. Wire strippers and multimeters are essential tools to locate the wiring and make precise connections. It is also recommended to purchase electrical tape and insulation to protect the connections against damage. After the installation is complete, it's a good idea to check the device to confirm that it's functioning as intended.
A Ghost immobiliser is an excellent way to protect your vehicle against theft, particularly in high-crime areas. It can be integrated with an iPhone application to make it easy to manage and monitoring. It stops key cloning, ECU-swapping, and other security threats. It's a favorite choice for those who own vehicles looking to protect their investment. It's simple to install.
The Ghost II immobiliser features a elegant design and low profile which makes it invisible to thieves. It is connected to your vehicle's CAN (Controller Area Network) and stops you from starting the engine without entering a pin code. The PIN code is generated by pressing a set of buttons on your steering wheel, console or door. It can also be changed at any point. The device is also tamper-proof, and includes an GPS tracking system that will aid police in locating your vehicle in the event of theft. It's an excellent option to safeguard your car from thieves, and it's Thatcham approved.