Ghost II Immobiliser
Secure your vehicle from key-cloning, hacking and car theft. It's silent and inaccessible to a potential thief because it doesn't use LED indications or key-fob tags to let them know it's there.
Transport Mode can be temporarily disabled in certain situations such as vehicle transport or when your vehicle is being repaired.
Simple PIN code Change Process
Ghost is a revolutionary next generation security device that can secure your vehicle without cutting wires, or adding an aftermarket alarm key fobs for immobilisers or alarms. It connects directly to the vehicle's CAN Data Network. A personalised PIN code can be programmed using the factory buttons that are located on the dashboard and steering wheel. This code prevents the engine from starting and is inaccessible to any RF scanning technology or code-grabbing technologies used today.
The system also has an emergency Pin Code override in case the user forgets their pin code or a button to program becomes inoperative. The system also comes with a Service/Valet Mode that allows the vehicle to be temporarily started and driven without the need for an active code, making it ideal for transport or maintenance.
The UK automotive aftermarket, while thriving, is not invincible to theft. The OBD port on your vehicle could be hacked by thieves in order to avoid traditional deterrents such as locking your steering wheel and wheels. This can be done with the use of a laptop, USB cable, and a low-cost OBD scanner that can be purchased on the internet for less than PS50.
To prevent theft, it is crucial to safeguard your vehicle with an immobiliser for ghost ii. It's a small device that can help prevent vehicle theft. Once you know your PIN code it's simple to use. The device is contained inside of a tiny box that can be plugged inside the wiring harness of your vehicle. It can be placed anywhere on your car and is weatherproof. This makes it difficult for thieves to locate. In addition to this it is simple to install and comes with a guaranty.
Weatherproof tiny device
The device connects into the CAN data network of your vehicle without cutting any wires and works silently. The device can be programmed with a an individual PIN by using the buttons on your dashboard and steering wheel. This will help prevent theft. The device also has an built-in GPS tracker. It can be activated via an app on your phone and is recommended by several car insurance companies. It is weatherproof and is able to be hidden in the car which makes it virtually impossible for thieves to locate.
Ghost ii is silent, in contrast to traditional systems that can be heard by criminals. It requires 4 to 21 button presses on the buttons of the vehicle. This can be set by the owner of the vehicle according to their preference and the sequence can't be cracked. There is a mobile phone App that can be used to disarm the system, and in the event that you decide to sell your vehicle, there is an official reset code that can reset the CAN bus immobiliser.
Modern thieves can use diagnostics to detect circuit breakages on modern vehicles. The Ghost, however, does not possess any. This makes it an extremely secure and reliable system that can be fitted on the vehicle by our skilled team of CANbus-certified immobiliser fitters.
Contrary to other CANbus immobilisers, which may require key fobs, the Ghost is compatible with all kinds of vehicles. The technology it uses is so advanced that it is able to protect against various security threats including signal relay attacks and ECU switching. It also works with a range of smartphones, and it can notify owners in the event that the vehicle is driven by an unauthorized person.
Tested for each vehicle
Ghost is a revolutionary immobiliser system that shields your vehicle from key cloning, hacking, and even key theft like no else on the market today. A criminal would need to physically remove the device from your vehicle, take it away in the form of a trailer, then put it back on another to steal a Ghost protected vehicle. It also protects against the use of wheel locks or jumper cables, as well as universal keys.
This simple to install system works quietly and connects to your vehicle's CAN data circuit, making it possible to directly communicate with the ECU (Engine Control Unit). It is sealed and so small that it can be wrapped in the harness of your vehicle and placed anywhere, making it virtually impossible for thieves to detect.
Once it is installed, it stops your vehicle from starting until the disarming sequence is activated by pressing the buttons on the steering wheel, door panels or the centre console. It can be up to 20 digits and lets you choose how secure you want to be. It can also be used to activate a Service/Valet option that lets you temporarily start and drive your vehicle without needing to enter your PIN.
Since it is based on the CAN data circuit there are no radio frequency signals like an immobiliser relay that is traditional This means that a burglar cannot listen to the relay to try to figure out the PIN code is being entered. Also, it doesn't have circuit breaks and cannot be detected by diagnostics tools or by RF scanning or code-grabbing technology.
Boundary Car Care is proud to be an approved installer of this wonderful product. We are extremely impressed by its performance and the peace-of-mind it provides our customers. It is a great way to safeguard your pride and happiness in these challenging times.
Emergency Pin Code override
The Ghost immobiliser prevents your car from starting without the correct PIN code. It is weatherproof and tamper-proof. It's discreetly hidden within the wiring harness of your vehicle and uses the buttons on your steering wheel/ dashboard to generate an individual code sequence that has to be entered in order to start your vehicle. It's not a thatcham device, as it does not use LED indicators and is connected to your vehicle using the CAN system. This makes it inaccessible by professional thieves who can detect alarm/immobiliser systems in modern vehicles with accessible diagnostic tools.
Entering an emergency override into the app on your smartphone will temporarily disable your Ghost immobiliser. This allows you to loan your car to family members, friends or valet, without sharing your pin. This is ideal for situations such as servicing or when you need to leave your car at a garage or valet.
Ghost can be used in conjunction with the driver fob. This gives you the option to start your car using your key or via the app. This is perfect for when you want to hand your child the keys to the car, or if you are unable to enter the pin number in a hurry.
It's no surprise that the Ghost immobiliser with its easy PIN-change procedure, user-friendly interface, and a myriad of safety features, is recommended by many insurers. It is also covered by a security guarantee. Its sleek slim design and seamless integration with your vehicle's current systems make it an indispensable addition to any high-performance or classic vehicle.
Service/Valet Mode
The Ghost is an immobiliser which can stop theft of vehicles by blocking the communication between your key and the ECU - meaning that the engine can't be started without entering a unique PIN code. It's also hidden in the wiring and is therefore difficult to spot. It does not use LED indicators that could identify its location. This is great the time you need to hand over your car to a mechanic, or even valet parking. To activate valet mode, enter the code that was handed to you by your engineer upon the completion of installation - it will allow them to start your car without having to enter the sequence to disarm. To exit valet, simply return your vehicle to normal operation. The code will automatically change to the pin you normally use.
Unlike other aftermarket security devices that rely on your vehicle's buttons or key-fobs, Ghost is designed to be integrated into your vehicle's CAN bus system. This gives it unparalleled security against modern theft techniques such as key cloning and hacking.
Once installed your engineer will show you how to arm, disarm and valet mode your vehicle. ghost immobiliser review of this is done via your smartphone app. Your engineer will design a unique pin that's easy to remember, yet mathematically inaccessible to thieves. If you forget your pin you don't have to worry because every installation comes with an Emergency PIN Code Override to get your vehicle working again.
Our installers are fully trained and are able to install your Ghost correctly. All of our installations are completed at the customer's premises. We give a brief explanation on how to operate the device and mobile application. Once your Ghost is installed, we ensure its functionality for life.