How to Install a Ghost Immobiliser
Ghost immobilisers protect your vehicle from key cloning and hacking. It stops the engine from running until a PIN code is entered. It can be as long as 20 characters.
This additional layer of security is not detectable by thieves who are unlikely to be expecting it. Certain systems also come with an app that allows owners to disable the immobiliser if they forget their PIN or to switch to a service/valet mode.
Connecting to the vehicle's CAN bus
The Ghost 2 Immobiliser, a cutting edge security system, can be incorporated directly into the ECU of your vehicle. It offers a discrete barrier against thieves. ghost car immobiliser is highly efficient and user-friendly. This makes it a valuable asset to your vehicle's security arsenal. However, like any anti-theft device, it's not foolproof and requires regular maintenance to ensure proper operation. Fortunately, immobiliser ghost can aid you in getting the most out of your Ghost 2 Immobiliser.
CAN (Controller Area Network) is a reliable serial network that allows microcontrollers to communicate with one another in short distances, without the need for a central control unit. It is designed to multiplex electrical wiring in vehicles, saving on copper. It offers many advantages including the low cost and ease of use.
The CAN protocol is utilized in the majority of modern vehicles to communicate with the engine management system, steering control module, air conditioning controls, and many more. It also transmits sensor data like speed sensors and other inputs, to control the vehicle's various features. The CAN bus can be used to monitor the health of these different components and can prevent the vehicle from starting if it's in an unsafe condition.
It's crucial to understand how the CAN bus works and how it is secured. Using CAN bus can be a great way to add new features to your vehicle, but it's vital to safeguard it from hackers and other threats. Installing a firewall and monitoring your CAN-bus with software is the best way to achieve this.
Ghost2's discrete control unit is hidden within the dashboard or wiring harness, preventing an intruder from physically altering it. It is impossible to reset a PIN code or emergency code without access to the vehicle.
If you need to give your car away to a valet parking service, maintenance or for any other reason, you can use the Transport Mode. This feature disables both the keyfob as well as the ignition functions of the Ghost immobiliser. It will only be activated after the vehicle has travelled 31 mph for a period of 15 minutes.
Creating an PIN code
The Ghost immobiliser protects your car from thieves. The latest technology utilizes a PIN code to disable the engine and prevent it from starting if you do not have the correct code or an authorized fob or mobile device. The system's subtle design ensures the system is unnoticeable and offers unparalleled security against theft. Additionally, the system is TASSA certified and can result in significant savings on car insurance premiums.
During installation, Ghost enters a "learning mode" to record the sequence of buttons that are that are pressed to create your unique pin codes. Once the pin code has been created the installer will guide you through the steps to activate the system. Once activated, the Ghost system will disable the starter motor of your vehicle until a valid PIN has been entered or the vehicle is switched into transport mode. This makes it extremely difficult for thieves or cloners to hack or clone your vehicle's starter system.
Installing an Ghost immobiliser is simple but it is crucial to follow the detailed instructions in the user's manual to ensure proper operation. Hand tools are essential in making the perfect connections and a multimeter can help you verify the electrical value. Insulation tape, heat shrink tubing, and cable ties can be used to protect exposed wiring. Check the system on a regularly basis to detect any potential issues.
After the installation is completed, it is important to make a final test of the system before turning on your vehicle's ignition. Ghost immobilisers are able to rearm themselves after 3 to 30 seconds, depending on the model of the vehicle. The system also comes with a Service/Valet mode that lets you temporarily disable the system to service or valet parking.
The immobiliser should be hidden in an inconspicuous location under the steering wheel or dashboard. Use a small amount of tape or paint on the wires of the CAN H and CAN L to make them easier to locate when testing. Additionally the CAN H and L wires should be connected to a power source that is able to provide constant 12V. It is essential to test the connections again after testing as incorrect identification of these wires could cause the system to malfunction.
The system must be activated
A ghost immobiliser prevents your car from starting when you press a few buttons inside the vehicle, usually on the steering wheel or door panel, or the central console. The sequence can be altered by the user in case it is needed. Once the system is activated it is not able to be disabled by thieves which makes it a great choice for anyone who wants to secure their vehicle from theft.
The system is designed to be undetectable. This means it cannot be detected by modern diagnostics or code-grabbing technology. It also does not send out radio frequencies, which makes it even harder for thieves to detect the device.
If the device is discovered it will stop the engine from starting. It will also sound an alarm to scare thieves away. The device can be used to monitor the location of a car, which will help police recover the vehicle in case it is taken.
Contact Car Specalist Customs for a estimate or to discuss your options in an immobiliser that is ghost-like. We are fully qualified to install a ghost immobiliser for your vehicle, and will make sure it is concealed in a difficult-to-access area. We also offer other security measures such as a wheel lock and kill switch to help keep your car safe from thieves.
Disarming the system
It is essential to know how to deactivate a Ghost immobiliser if it is installed on your car. This is useful in the event that you lose your keys or your car battery fails. The system has a unique PIN code that only you know. It cannot start the car without this code. Pressing a combination button on the steering wheel or on the dashboard is the easiest method of entering your code. This is a far simpler method than using the key fob and it also keeps anyone from copying your remote.
Ghost2 is noninvasive unlike some aftermarket immobilisers that require cutting wires for installation. It also integrates with the CAN bus system of your vehicle to operate. Its main feature is its ability to bypass the engine without affecting the normal functions, making it impossible for thieves to use signal boosters to copy your car keys. It does not emit radio frequency, so thieves won't be able to detect it.
The Ghost system also comes with an option called Transport Mode which allows you to temporarily disable the security system in circumstances like transportation or servicing. This is a great option if you need to lend your vehicle to someone without sharing the PIN code, or when you wish to secure your vehicle while driving it. To activate Transport Mode simply press the service button five times within 2 seconds. The Ghost system will confirm activation by giving five indication signals.
Save the emergency code outside your vehicle in a safe place. If you are ever locked out of your vehicle, you can call the technician or the company that installed the system, and they will give you the code. If they are not able to contact you You can always attempt to contact an authorized dealer but this would require verification procedures and could incur additional charges.
Apart from the ease of this system, you can count on it to guard your car against theft and reduce insurance costs. Many insurance companies offer reduced premiums or financial incentives to install this system to prevent theft.